Exterior Trim Replacement in Asheville, NC
Fascia, soffit, corners and casings replaced in materials that stop the rot cycle instead of restarting it.
Trim projects typically run $3,500 to $18,000. Free estimate.
- Licensed & Insured
- Family-Owned
- Free Estimates
Trim fails before siding does
Trim takes the weather at every edge and end grain – fascia under a dripping gutter, rake boards on a wind-driven elevation, casings under a window with no sill pan. On the older Asheville homes we work on, the siding is often still serviceable while every horizontal trim board has gone soft.
Replacing trim in the same paint-grade pine restarts the same clock. We usually put back PVC, fiber cement or engineered wood, all of which handle the exposure that killed the original.
What we replace
- Fascia and soffit, including vented soffit where attic intake is short
- Corner boards, frieze and rake boards
- Window and door casings, with sill pans added where none existed
- Porch columns, beams and skirt boards
- Water table and band boards at the base of the wall
Materials
PVC never rots, holds paint well and is the right answer for fascia and anything close to grade or water. Fiber cement trim matches Hardie siding and stays dimensionally stable. Engineered wood trim costs less and looks like wood where that matters. We mix them – PVC where water hits, wood-look products where the eye lands.
While we are up there
Fascia replacement is the right moment to correct gutter slope, add drip edge where it is missing, and improve soffit ventilation. Those three things together often solve the ice and moisture problem that rotted the fascia in the first place.
We work in Asheville, Hendersonville, Arden, Candler, Fletcher, Weaverville, Black Mountain, Mills River, Brevard and Waynesville.
How the project runs
-
01
Inspection
We probe the trim, check gutter slope, drip edge and soffit ventilation.
-
02
Scope
Material choice per location, priced with an allowance for framing repair.
-
03
Replace
Removal, framing repair, new trim installed and sealed, gutters rehung where needed.
-
04
Finish
Caulk, paint and a two-year workmanship warranty.
Why homeowners choose Big Hills
- Licensed NC general contractorBuilding in Western North Carolina since 2018, 150 homes delivered.
- One crew, start to finishIn-house carpenters and site supervisor instead of a chain of subs you never meet.
- Fixed written scopeYou approve selections and the number before demo day, so the budget holds.
- 2-year workmanship warrantyThe same warranty we put behind the homes we build from the ground up.
Frequently asked questions
What does exterior trim replacement cost?
Typically $3,500 to $18,000 depending on how much of the house is involved, the number of stories and material. Fascia and soffit on a two-story with complex rooflines is the expensive case.
PVC or wood?
PVC anywhere water sits or splashes - fascia, water table, column bases. Wood-look products where appearance matters and exposure is moderate. Mixing them is normal and sensible.
Can you match the existing profile?
In most cases yes, with stock profiles or milled to match. Where an exact match is not available we tell you before the order, not after installation.
Should the gutters come off?
For fascia work, yes - and it is the right time to correct slope and add drip edge. We rehang them as part of the job.
Get a free in-home estimate
Tell us about the project. We walk the space, talk through scope and materials, and send a written estimate — no charge, no pressure.